The holiday season is here, and for many people that means new gear, gadgets, and of course toys with screw-closure battery compartments.
This Stanley 4-in-1 screwdriver (STHT60082) is priced at just $2.49, and at the time of this posting it’s eligible for free shipping at Home Depot.
It comes with 2 double-ended bits that cover the following sizes: Phillips #0, #1, slotted 1/8″, 5/32″.
Advertisement
The screwdriver is of course versatile enough to be used beyond opening up battery compartments.
I got a robot model kit for my nephew this year, and it requires a screwdriver to fasten in some of the parts. So, I sent along a Stanley 4-in-1 screwdriver to ensure he has everything he needs to build it.
Actually, it was a different Stanley screwdriver that I sent him – the older model that’s nearly double the price – as this model was temporarily unavailable for shipping.
I have been a long-time fan of Stanley’s mini screwdrivers, and have used this model as well as its predecessor. They’re excellent for the money.
If you’re on the fence, and it’s available, keep in mind that it’s just $2.49 shipped. At this price, or even a bit more, it’s a household must-have.
Price: $2.49
Advertisement
Upgrade Options
Klein Pocket Screwdriver
If you’re looking for a more premium precision tool, consider the Klein 4-in-1 pocket screwdriver.
The Klein 32614 features a reversible shaft with two positions – a short end for quick use and pocketable carry, and a long end for greater reach. In the short position, the end of the screwdriver extends to protect the screwdriver bit tip – and your pocket – for storage or carrying.
It comes with two double-ended screwdriver bits that cover the same tip styles and sizes as the Stanley above: Phillips #0, #00, Slotted 1/8″, 3/32″.
Price: $15.97
Klein 4-in-1 Precision Screwdriver
Klein has another 4-in-1 electronics screwdriver, model 32581, with the same tip styles and sizes.
This model is similar, but isn’t as compact or well-suited for pocket-carry.
Price: $10.97
PB Swiss Insider Mini
The PB Swiss Insider (model 169 Type 1) is a pocket screwdriver with 3 double-ended bits.
I have found that this model better fits smaller fasteners, especially those in deeper recesses. If this one can’t get the job done, you’ll need individual mini or precision screwdrivers.
There’s a downside to this model – it features all-plastic handle (like the far less expensive Stanley). But on the upside, this also means it’s lighter than the Klein.
Sizes: Phillips and slotted #0, #00, #000
Price: $19.50
Scott K
All of my Stanley tools have held up extremely well for the price. I have a full size multibit driver that’s typically the first tool I reach for.
Jim Felt
“Late arriving Stocking Stuffers”…
Frank D
The problem with any of this type of multi bit is the short reach with the short bits and fat shafts for recessed holes and the fact that electronics and especially toys use any manner of safety screws, not just slotted and philips.
fred
Yep – but something like a Nanch or Ifixit set might be more than some wish to spend on a stocking stuffer:
https://www.amazon.com/Nanch-Precision-Screwdriver-Smartphone-Electronics/dp/B00QZLV03O
https://www.amazon.com/iFixit-IF145-299-4-Driver-Bit-64pc/dp/B0189YWOIO
I’ve gifted both of these – and often use the Nanch set myself.
Scott K
How do you like the ifixit set? I’ve gone back and forth for a while about getting one. I won’t use it often, but always think about it when I come across an odd screw type. I’ve read some reviews complaining about the quality for the price…
brandon
I picked up a larger iFixit set from Bestbuy for $20 last year and have used it several times. It came with a large and small driver that were both all metal construction. The end cap spins freely which is nice for holding pressure when using and I have had no complaints with performance or quality. When used for small parts repair with hand tools and not an impact driver the bits hold up fine. I would buy another set of ever needed.
fred
So So. I found the handle rotation smooth – but a bit tiny for my fat fingers. The flex extension is nice – but it would be nice to have a rigid extension too. I’m not sure if I like the magnetic-closing two-piece box.
It now resides at my place in Sanibel – so it’s not likely to get any use for quite some time – until we fully recover from Hurricane Ian.
I use the Nanch set quite a bit and like it.
fred
I might have added that I’ve heard neither complaints nor compliments about the 2 IFixit sets that I gave as gifts but was told that the 1 Nanch set I gave was very nice.
fred
My stocking stuffers for 2019 included this slightly different $4.35 one from Stanley:
https://www.homedepot.com/p/Stanley-4-in-1-Pocket-Screwdriver-66-344/301571524
I paid $3.13each in 2019
Stuart
That’s the older model. I ordered one last week because this one wasn’t available for shipping for a few days.
Scotty.
Which do you prefer? Old or new version?
Jerry
I have both and the old (more$$) one has the bit sticking out past the body farther when in use so it has a little more reach, and it also has a magnet. Build quality seems equal.
Wim
A nice upgrade is the Wera Kraftform Kompakt 25 multi-bit screwdriver. I use this one all the time in the house.
Can;t beat the price of that stanley though, but for me it is worth it.
Stuart
I’d consider Klein as a notable upgrade – https://toolguyd.com/klein-tools-pocket-screwdrivers/
The Wera is excellent but is a completely different class of tool.
MM
There are a lot of screwdrivers like this on the market, I feel that most of them are plenty good enough for basic tasks. I have an old Fiskars PowerGrip in my kitchen junk drawer which holds 4 double-ended bits plus one in the tool, and a Wiha 380 in my shed which holds 6 bits in the handle and one in the tool. While there are far better tools on the market these days either one is plenty adequate for basic around-the-house tasks and they’re both more than 20 years old. The classic 6-in-1 and similar designs are good for this role too. I don’t think there is much need to overthink it.
Stuart
Overthinking tools is my specialty. =)
fred
About tools and so many other things – analysis sometimes fails us. We can look at them in dozens of ways and still miss someone else’s perspective borne of personal preference, anatomical differences and actual work patterns.
I used to say that if I asked the crews in the remodeling business (we had 16 lead carpenters) what they thought about a new tool that we had tried out – I’d likely get 17 different opinions. The thoughts about the same tool tried out in our plumbing business could also be so different that it was sometimes hard to tell that we were speaking about the same item.
Jared
Picquic Teeny Turner is a closer alternative. Different design though – holds a wider bit selection, is shorter but has a thicker handle. I still like it a lot though. I appreciate that it has T6, T8 and T10, which I can use to service my pocket knives, for example. They’re about $6-7 in Canada, I imagine a bit less in the USA.
fred
My local tool supplier sells them for $6.99 US – and Amazon wants $8.42 (with their “free shipping” included)
https://www.amazon.com/Picquic-46106-Turner-multi-bit-screwdriver/dp/B077P3WLW3/
This may be a case that its cheaper in Canada since Picquic is located in Vancouver BC
Dave
Says shipped to home not available for this item ☹️
Stuart
Thanks!
Hmm – looks like it sold out again. Hopefully it’s restocked again soon.
MT
Looks like Lowes has a Craftsman version of this (or the older model) in stock if you can’t find Stanley’s at your local Home Depot.
MT
Oops. Forgot a link:
https://www.lowes.com/pd/CRAFTSMAN-2-Piece-Plastic-Handle-Magnetic-Multi-Bit-Screwdriver/1002534590
Mark M.
Agree with a previous comment that the size of this one is good for surface-mount screws but is problematic when they are down in a recess, which seems to be pretty common on kids toys. I am a huge fan of the Picquic brand and have several of these Teeny Turners in the house and garage: https://www.amazon.com/dp/B077P3WLW3
They don’t completely solve for the ‘down in a recessed shaft’ problem but are still super handy and the grip is more rubbery than the photo would let on.
Jared
The Teeny Turner might be my favorite Picquic. Nothing wrong with the rest of the lineup, but I have nicer multi-bit drivers if we’re talking about larger sizes.
It’s kind of an odd one though, since the handle diameter is very large for a “precision” screwdriver. Someone who isn’t paying attention can overdo it on small screws.
However, as I mentioned in an earlier comment, it has T6, T8 and T10 bits which just happens to be the three sizes 99% of pocket knives use. Sometimes pocket knives have a threadlocker product put on those screws from the factory (probably both to keep the knives from coming apart AND to prevent people like me from disassembling them on purpose) or are just seriously tight for the screw size (looking at you SOG with your strange decision to use a T6 on your pivot screws).
A precision screwdriver with a “high torque” handle happens to be the exact combination I want in that case. Plus, given that the bits seem to be good quality, it is relatively cheap and is small and pocketable, I think the Teeny Turner is a hidden gem for knife maintenance. A little oil, a hone or strop and a Teeny Turner makes a nice compact maintenance kit.
mike ricchino
The Klein pocket screwdriver is /nearly/ perfect EDC screwdriver. I just wish they would make it the 2mm bigger it needs to be in order to use standard bits.